AMS-20A Micro solar drier/ processor for vegetables and fruits

1.0

Technical Specifications:       General                         

1.1

Solar Dryer lid made of transparent fibreglass sheet, thickness of 3-4 mm

1.2

Solar Dryer lid support made of (25-30) x (25-30) angle iron.

1.3

Solar Dryer lid dimensions:       (1900-2000) mm long x (900-950) mm

height

1.4

Solar Dryer Frame made of 25 x 25 angle iron.

1.5

Walls of the dryer made of galvanized sheets.

1.6

Wall height up to lid: 250-300 mm                  

1.7

Length of solar Dryer wall:  1900-2000 mm

1.8

Width of solar Dryer frame:  900-950 mm

1.9

Frame cover made of galvanized sheet with 32 holes for ventilation

1.10

Fan installed on the side of the wall, the fan is covered with gauze/screen to avoid insects entering, and the circulation of the fan per second is 100.

1.11

Solar panel installed with 36 v output and capable of running the fan without using any battery cell

1.12

Galvanised tray for food items. The try cells should be 50mmx 50mm

1.13

Galvanised tray dimensions:          1850- 1900 mm long x 850-900 mm wide x 60-70 mm thickness with Rubber wheel

1.14

Solar Dryer legs made of (25-30) x (25-30) iron angle; (500-550) mm long with Rubber wheel with total locking devices - Wheel Ø x wheel width 8 x 6 cm

2.0

Solar Charge Controller

2.1

Built-in microcontroller, one-key setting,digital display,automatic memory function.

2.2

4-level PWM charging management, large LCD screen clearly displays condition and data, easy to switch modes and parameter configurations, all parameters can be adjusted.

2.3

This controller has double reverse current protection, built-in short circuit protection, open circuit protection, reverse connection protection,overload protection, and generates low heat.

2.4

Easy to install and operate, the charging controller should first connect the solar panel, and then connect the load, disassembly order is opposite to the wiring order, with doublescrew backflow protection.

2.5

Small, easy to carry and store, convenient, can be used for a long time, a good solar regulator.

2.6

Rated Voltage: 12V 24V automatic

3.0

Battery for Solar Charge Controller

3.1

AGM (Absorbed Glass Mat) separators with superior grid and component designs

3.2

Longer shelf life, minimum one year

3.3

Extreme vibration resistance

3.4

Heavy-duty, flushed mount terminals

3.5

Voltage: 12

3.6

Capacity: 6.5Ah

3.7

Weight: 1 - 1.70 kg

3.8

Terminal Layout:  +  -

4.0

Manuals:

4.1

Operators’ handbook (printed or on CD) in English, one for each unit

4.2

The cost of the manuals should be included in the DPU cost of the equipment.