hand corn thresher

Product Introduction

hand-cranked corn thresher is a small agricultural machinery. It has a pair of outer sleeves and movable inner sleeves that match the inner and outer diameters of the bearings. The movable inner sleeve has a crank at the end, and the front end is a bergamot-shaped claw with a convertible caliber. A bracket with a fixing device is provided under the outer sleeve, and the front end is provided with a protective cover with a hole that protects the hand from entering the bergamot-shaped claw and facilitates the corn grains to fall out.

Product Details

hand corn thresher features and composition:

use it, no power, low breakage rate, and clean threshing. The structure itself is simple, and the efficiency can reach 80-100kg of threshing per hour. The hand-cranked corn thresher is composed of a handle, a handle, a rotating shaft, a hub, a support plate, a bracket, an insert plate, a spoke, a shield, a tool holder and a blade. The hub is sheathed by the rotating shaft. The bracket can be fixed on the board by screws. On the right side of the rotating shaft are the insert plate and the bracket, which can fix the shield. The right end of the rotating shaft is connected with one end of the handle, the left end of the shaft is a spoke insertion hole, the other end of the spoke is welded on the tool holder, and the tool holder is evenly distributed with four blade fixing holes. This product has simple structure, low cost, suitable for individual farm use, simple operation and no electricity.

add your own belt and motor can be electric